[. . . ] TUFFY® TILLER FRAME WEIGHTS KIT – OEM-290-265 / 290-265-081
INTRODUCTION
The frame weights are an easily installed and recommended attachment. [. . . ] IMPORTANT: Left and right sides of the unit are determined by standing behind the unit, in the operator’s position, and facing in the direction of forward travel.
Figure 3: (A) 1/4" screw and flat washer. Put a 5/16" flat washer onto one of the 5/16-18 x 1-1/2" screws and install the screw into the rear hole of the frame weight (B, Figure 3). Put a 5/16" lock washer and a 5/16" nut onto the rear frame weight screw. Install a 1/4" nut onto the forward frame weight screw and tighten securely (Figure 4).
Figure 1
KIT CONTENTS
Check to make sure that you have all the necessary parts (see list below). Part
GW-55066 1100799 1100811 1186230 1186229 1100242 1107381 1107382
4. Align the holes in the frame weight with the front holes in the transmission pan and the frame rail. [. . . ] BOX 361131, CLEVELAND, OHIO 44136-0019, 1-866-840-6483
Printed in U. S. A. [. . . ]